Taicang Global Machinery Co., Ltd.
Not only the good machine, but also the best attentive service
Add to Cart
Carbide Insert OD External Scarfing Tool Scarfing Insert For Steel Tube Mill Making
External Scarfing Inserts Tools for High Frequency Welding Pipe making:
Application:
Exterior scarfing inserts for tube machining
Deburring interior scarfing inserts: deburring the tubes to obtain the best results of the final products
Workpiece material: steel, stainless, cast iron etc.
Coating: PVD/CVD
Standard Specification and machining range :
| External Scarfing Inserts-Six Edges | ||||||
| ITEM CODE | φI.C | S | a° | φd | Machining Range | |
| (mm) (inch) | ||||||
| H-R9.0 (DET-3) | 25 | 4.76 | 18 | 5.1 | 9-15 | 5/8'' |
| H-R13 (DET-5) | 25 | 4.76 | 18 | 5.1 | 15-23 | 5/8''-7/8'' |
| H-R17 (DET-7) | 25 | 4.76 | 18 | 5.1 | 23-32 | 7/8''-1.1/4'' |
| H-R21 (DET-8) | 25 | 4.76 | 18 | 5.1 | 32-41 | 1.1/4''-1.5/8'' |
| H-R28 (DET-9) | 25 | 4.76 | 18 | 5.1 | 41-51 | 1.5/8''-2'' |
| H-R38 (DET-10) | 25 | 4.76 | 18 | 5.1 | 51-73 | 2''-2.7/8'' |
| H-R48 (DET-11) | 25 | 4.76 | 18 | 5.1 | 73-92 | 2.7/8''-3.5/8'' |
| H-R60 (DET-12) | 25 | 4.76 | 18 | 5.1 | 92-118 | 3.5/8''-4.5/8'' |
| External Scarfing Inserts-Four Edges | ||||||
| ITEM CODE | Cutting Edge | S | φd | R | Machining Range | |
| Length(mm) | (mm) | |||||
| SPUB-63A | 19 | 4.76 | 5.1 | 9 | ≤18 | |
| SPUB-63B | 19 | 4.76 | 5.1 | 13 | ≤23 | |
| SPUB-63C | 19 | 4.76 | 5.1 | 15 | ≤30 | |
| SPUB-63D | 19 | 4.76 | 5.1 | 20 | ≤38 | |
| SPUB-63E | 19 | 4.76 | 5.1 | 25 | ≤48 | |
| SPUB-63F | 19 | 4.76 | 5.1 | 33 | ≤62 | |
| SPUB-63G | 19 | 4.76 | 5.1 | 45 | ≤86 | |
| SPUB-63H | 19 | 4.76 | 5.1 | 55 | ≤106 | |
| SPUB-63I | 19 | 4.76 | 5.1 | 65 | ≤126 | |
| SPUB-63G | 22 | 4.76 | 5.1 | 45 | ≤80 | |
| SPUB-63H | 22 | 4.76 | 5.1 | 50 | ≤90 | |
| SPUB-63I | 22 | 4.76 | 5.1 | 60 | ≤110 | |
| SPUB-63J | 22 | 4.76 | 5.1 | 75 | ≤140 | |
| SPUB-63K | 22 | 4.76 | 5.1 | 85 | ≤160 | |
| SPUB-63L | 22 | 4.76 | 5.1 | 100 | ≤190 | |
| SPUB-63M | 19 | 4.76 | 5.1 | 0 | ANY | |
| SNMX1507 OD Scarfing Inserts | ||||||
| ITEM CODE | Cutting Edge | S | d | R | Machining Range | |
| Length(mm) | (mm) | |||||
| SNMX1507-R15 | 15.9 | 8 | 5.1 | 15 | 15-20 | |
| SNMX1507-R20 | 15.9 | 8 | 5.1 | 20 | 20-25 | |
| SNMX1507-R25 | 15.9 | 8 | 5.1 | 25 | 25-30 | |
| SNMX1507-R30 | 15.9 | 8 | 5.1 | 30 | 30-35 | |
| SNMX1507-R35 | 15.9 | 8 | 5.1 | 35 | 35-40 | |
| SNMX1507-R40 | 15.9 | 8 | 5.1 | 40 | 40-50 | |
| SNMX1507-R50 | 15.9 | 8 | 5.1 | 50 | 50-60 | |
| SNMX1507-R60 | 15.9 | 8 | 5.1 | 60 | 60-90 | |
| SNMX1507-R70 | 15.9 | 8 | 5.1 | 70 | 90-110 | |
| SNMX1507-R80 | 15.9 | 8 | 5.1 | 80 | 110-130 | |
| SNMX1507-R100 | 15.9 | 8 | 5.1 | 100 | 130-170 | |